Skip to content
ROCKVANTMINING EQUIPMENT

RH-SD-012 · Surface

RILLHOLT RH-SD-012 Hydraulic Top-Hammer Surface Drill RigSurface Drilling Rigs

Road cutting, highway construction and foundation engineering.

RH-SD-012Product photo not available
Ask for current photos of this model.

Overview

The RILLHOLT RH-SD-012 is an internal-combustion, fully hydraulic crawler top-hammer rig whose upper frame rotates 360 degrees on the track frame, with rod handling controlled from the air-conditioned cab. It drills 76-102 mm holes (the range depends on site conditions and rock properties) with 38, 45 or 51 mm rods using an LD100 (HL650) rock drill rated 17.5 kW at 44-56 Hz and 1,335 Nm maximum torque. The CF100 feed beam is 8,000 mm long and the RH120 changer holds 6+1 rods of 3,660 mm for 24 m maximum depth. A Cummins QSB5.9 engine rated 154 kW at 2,200 rpm drives the Enduro 12 compressor, which supplies 6.2 m³/min at 8 bar. Weight is 14,500 kg with 90 kN traction and 20 degree gradeability.

Specifications

Specifications

Hole diameter
76-102 mm
Rock tools
38, 45 or 51 rods mm
Recommended hole diameter, T45 MF rod
64-89 mm
Recommended hole diameter, T51 MF rod
89-102 mm
Maximum hole depth
24 m
Rock drill
LD100 (HL650)
Impact power
17.5 kW
Percussion frequency
44-56 Hz
Maximum torque
1,335 Nm
Working pressure
100-170 bar
Feed beam
CF100, 8,000 mm
Rock drill travel
4,510 mm
Feed beam tilt
-6 / +108 deg
Feed beam swing
-56 / +55 deg (-18 / +93 deg with pin change)
Rod changer
RH120, 6+1 (51 mm) of 3,660 mm
Boom
Fixed boom, collaring height +0.9 m
Engine
Cummins QSB5.9
Engine power
154 at 2,200 rpm kW
Flushing air
6.2 m³/min at 8 bar
Screw compressor
Enduro 12
Fuel tank
320 L
Dust collector
DCR100, 23 m³/min, 1,000 mm water column vacuum, 13.4 m²
Cab
Air conditioned, noise below 87 dB(A), rod changing from the cab
Traction force
90 kN
Tramming speed
2.8 km/h
Gradeability
20°
Track width
400 mm
Upper frame
360 deg rotation
Total weight
14,500 kg
Transport dimensions (L x W x H)
9,585 x 3,005 x 3,440 mm

Ask about this equipment.

Start with one contact method and a short equipment request. We can confirm site conditions and configuration during follow-up.

Prefer WhatsApp? Message ROCKVANT about the RH-SD-012.

One contact method is enough.

By sending this inquiry, you ask ROCKVANT to use these details to respond. Privacy