Skip to content
ROCKVANTMINING EQUIPMENT

RH-UD-006 · Underground

RILLHOLT RH-UD-006 Underground Hydraulic JumboUnderground Drilling Rigs

Development drifting and face drilling in headings up to 34 m² in underground metal and non-metal mines

RH-UD-006Product photo not available
Ask for current photos of this model.

Overview

The RILLHOLT RH-UD-006 is a single-boom electro-hydraulic tunnelling jumbo covering headings up to 34 m², built on a Deutz TCD3.6 L4 74 kW Tier III engine with hydrostatic transmission and four radial piston wheel motors. An HL510 rock drill (18 kW) drills 43-64 mm holes and 76-127 mm reaming holes to 3,440 mm depth on the TF500-12 feed with 3,700 mm rods, carried by a B26F boom with 1,200 mm boom extension. The IBCQF hydraulic drilling control, 380-690 V 50/60 Hz electric system with 70 kW total input, FOPS canopy and 10,065 x 1,600 x 2,070/2,750 mm carrier give flexible, fast mobilisation.

Specifications

Drilling

Coverage area
34 m²
Rock drill
HL510, 18 kW
Impact pressure
Maximum 220 bar
Impact frequency
60 Hz
Rotation
Maximum 250 rpm, 400 Nm (OMS80)
Hole diameter
43-64 mm; reaming 76-127 mm
Hole depth
3,440 mm
Shank
T38 (male thread)
Recommended drill rods
T38-H35-R32 / T38-H35-R35 / T38-H35-Alpha330
Rock drill weight / length
130 kg / 1,024 mm; profile height 76 mm
Feed beam options
TF500-10: length 4,660 mm, rod 3,090 mm, hole depth 2,830 mm, 470 kg; TF500-12: 5,270 mm, rod 3,700 mm, hole depth 3,440 mm, 500 kg; TF500-14: 5,880 mm, rod 4,305 mm, hole depth 4,050 mm, 530 kg; TFX6/12 telescopic: 3,540 and 5,370 mm, rod 1,830 and 3,700 mm, hole depth 1,610 and 3,440 mm, 620 kg
Feed thrust
25 kN (all feed beams)
Boom
B26F; automatic parallel holding 29 m², boom extension 1,200 mm, feed extension 1,600 mm, net weight 1,850 kg, rotation 360 degrees
Drilling control
IBCQF hydraulic: adjustable drilling parameters, fully powered impact, half-power collaring, rotary flushing, automatic anti-jamming, stop and auto return

Hydraulics

Hydraulic power pack
HPP555, 55 kW, direct hydraulic control, 65 cc + 35 cc + 33 cc pumps, 10 um filtration, 200 L tank, electric filler pump, oil cooler OW30 (30 kW), low-level auto stop

Electrical

Electric system
380-690 V (+/-10%), 50-60 Hz, 70 kW total input, main switch NSX160N/38, star-delta starting 380-575 V, automatic cable reel CR, phase sequence protection
Battery
2 x 12 V, 80 Ah
Lighting
Front 4 x 48 W, rear travelling 2 x 48 W, operator 1 x 5 W, flashing beacon

Water and air

Water system
WBP1 water pump, 3 kW, 33 L/min at 15 bar; inlet 4 bar; pump inlet 2-5.4 bar; system water pressure 10-15 bar
Air system
Compressor CTN10, 1 m³/min at 7 bar; shank lubrication SLU-1 (air / oil mist); air consumption 250-350 L/min

Safety

Safety canopy
FOPS falling-object protection per ISO3349; travelling height 2,750 mm high / 2,535 mm low; noise 102 dB per EN16228
Fire extinguisher
1 x 6 kg ABC handheld

Chassis

Tramming speed
8 km/h on level ground; 4 km/h on a 14% (8 degree) grade
Gradeability / side tilt
15 degrees / 5 degrees
Engine
Deutz TCD3.6 L4, 74 kW, Tier III, CN III
Drive
Hydrostatic transmission with 4 radial piston wheel motors
Tires
10.00-15
Brakes
SAHR safety wet brakes; parking and emergency hydrostatic
Oscillation
MERCURY articulated frame +/-35 degrees; rear axle oscillation +/-6 degrees
Ground clearance
295 mm
Steering
Articulated steering +/-35 degrees
Turning width (T-type)
2,750 mm
Fuel tank
60 L
Brake release
Manual pump for brake release
Hydraulic supports
2 x extendable (front) + 2 x vertical (rear)
Dimensions (L x W x H, transport)
10,065 (TF512) x 1,600 x 2,070/2,750 mm
Total weight
11,600 kg

Service

Lubrication
Centralized lubrication points on carrier

Options

Options
Cleaning system with reel 15 bar (TS2-343) or high pressure 180 bar (TS2-343); manual grease lubrication system (5-2110); spare rock drill HL510; complete rock drill tool kit (2-1861); field kit (2-1862)

Ask about this equipment.

Start with one contact method and a short equipment request. We can confirm site conditions and configuration during follow-up.

Prefer WhatsApp? Message ROCKVANT about the RH-UD-006.

One contact method is enough.

By sending this inquiry, you ask ROCKVANT to use these details to respond. Privacy